Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Headlight adjustment, alignment, and setting

Model: (Various brands) Various
Part: Headlight

In this video we can see how to adjust and align the headlights: we see how to adjust the height of our headlights. We need to stand in front of a white wall, and make marks where the beam of light starts to rise upwards and to the right. Place a meter right in front of the low beam light, and as a rule the height of the headlights decreases by one centimeter every meter: so here the beam of light in front of the headlight was 66 cm and on the wall, since the car is positioned at 5 meters, it should be at 61 cm. Obviously the measurement must be the same on both the right and left sides.

Posted on 7 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust Car Headlights
How to Adjust Car Headlights
(Various brands) Various Adjusting the front headlights is a task that requires the intervention of a qualified operator and a specific tool called a headlight adjuster. Befo…
How to Adjust Headlight Alignment
How to Adjust Headlight Alignment
(Various brands) Various Adjust the headlight alignment. The beam should point downwards. The internal adjustment raises the beam (but this depends on the vehicle's load). Th…
How to Adjust Wheel Camber
(Various brands) Various Wheel camber represents the tilt of the tyre itself, or more technically, it is the measure of the angle between the vertical and the centre plane of…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos