Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the glow plugs on a 1.5 DCi 106 HP engine

Model: (Various brands) Various
Part: Glow plugs

Video tutorial

In this video, we can see how to change the glow plugs on a 1.5 DCi 106 HP engine. The car in the video is a Renault Megane, but the same engine is also used in Nissan, Dacia, Lancia, Suzuki, Opel, and Fiat vehicles.

You will need a 10mm socket wrench with extension, a screwdriver, and pliers. Disconnect the intercooler pipe, then remove the cover of the engine block.

Try to move the pipe on the right side as much as possible, and then use the socket wrench with extension to remove the glow plugs, which are located at the bottom of the engine block. Replace them without overtightening, then reassemble the engine block cover and reattach the intercooler pipe.


Posted on 20 January 2025 by ScegliAuto


Related tutorials

How to replace the glow plugs in the 1.6 HDI engine?
How to replace the glow plugs in the 1.6 HDI engine?
(Various brands) Various In this tutorial we can see how to replace the glow plugs in a car equipped with a 1.6 HDI engine, a simple operation but one that requires good manu…
The operation of the glow plug control device.
The operation of the glow plug control device.
(Various brands) Various In this tutorial video, see how the glow plug control device works: the pre-heating system with glow plugs is equipped with a control device and cons…
How to Replace Glow Plugs
How to Replace Glow Plugs
(Various brands) Various Here’s how to replace glow plugs on a vehicle. The glow plug is a heating element that helps start a diesel engine in cold conditions. First, open th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos