Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open glued headlights

Model: (Various brands) Various
Part: Headlight

Video tutorial

If we have a stuck headlight that we can't open, this is a practical and economical system: we need a sturdy cardboard box in which to make a hole, with an opening to place a hairdryer with good power. To avoid air leakage, we put an old blanket on top, so that the heat remains inside as much as possible.

We heat the headlight for at least fifteen minutes, and then with a small screwdriver, we go around the perimeter of the headlight to separate the transparent part from the base. If it hasn't come off well, repeat the operation, or insist directly with the hairdryer on the parts that have not detached.

We recommend patience, it requires a lot of delicacy.


Posted on 10 February 2025 by ScegliAuto


Related tutorials

How to open car headlights.
How to open car headlights.
(Various brands) Various There are two types of front headlights: those with thermoplastic adhesive that can be easily opened with a heat gun, and those that are electro-weld…
What Is Variable Valve Timing (VVT) and How Does It Work?
What Is Variable Valve Timing (VVT) and How Does It Work?
(Various brands) Various Let’s see how Variable Valve Timing (VVT) works. In a combustion engine, the valves open and close to allow air and fuel in and exhaust gases out. Ti…
How to Adjust the Front Headlights of the Vehicle
How to Adjust the Front Headlights of the Vehicle
(Various brands) Various Adjusting the front headlights of the vehicle is a simple task that can be done independently. To adjust the headlights, position the vehicle in the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos