Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to easily mount the spare wheel

Model: (Various brands) Various
Part: Wheel

Video tutorial

How to mount the spare wheel if we have a flat tire? Actually, it is much simpler than you think. First of all, we need to understand if we have a repair kit or a spare wheel.

In this case, we can proceed by first wearing the reflective vest, placing the warning triangle 50 meters before the car. It will be very useful to also have a pair of work gloves and a mat to kneel on. Remove our spare wheel and the jack from its compartment; loosen the bolts with the car resting on the ground.

Once they are loosened, lift the car, finding the support point (each car has its own) under the central longitudinal beam.

Once the car is lifted, we can remove the wheel. Now we mount the spare wheel starting from the top screw, then the other screws, tightening them slightly, then lower the car to the ground.

Now we can tighten the bolts to 100/120 Nm, and the YouTuber gives us a tip on how to calculate the tightening torque without a torque wrench. Put the flat tire in the trunk and head to a tire shop to get it repaired, remembering that the spare wheel cannot travel at more than 80 km/h.


Posted on 11 March 2025 by ScegliAuto


Related tutorials

Possibility of Mounting the Spare Wheel Under the Camper
Possibility of Mounting the Spare Wheel Under the Camper
(Various brands) Various This video is not so much for DIY enthusiasts, who would require equipment and skills that not everyone may have, but rather to inform many campers w…
How to Remove the Spare Wheel from Pickups
How to Remove the Spare Wheel from Pickups
(Various brands) Various We often think that spare wheels are located inside a car's boot; however, many car manufacturers have taken to placing the spare wheel underneath th…
How to Extract the Spare Wheel
How to Extract the Spare Wheel
(Various brands) Various A simple operation, but it can cause various headaches if you are not familiar with the vehicle you are driving. This is a quick task that you can un…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos