Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to remove the spare wheel from the Pick up

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Wheel
Operation: How to remove the spare wheel from the Pick up

We are used to thinking that spare wheels are placed inside the trunk of a car, but in reality many car manufacturers, in order to make the trunk more spacious, have taken the habit of placing the spare wheel on the underside of the car like in Pick ups. Today we will explain how to extract a spare wheel placed on the underside of a Truck from its housing. To extract the wheel, we must open the small door on the rear bumper and insert the Truck key inside and rotate it until the bolt is removed. Once the bolt is removed, we must insert a metal tube inside and rotate it until the wheel disconnects from its housing.


Posted on 11 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - Why is the spare wheel locked? Read Answer
    • Vari - How much does it cost to align the wheels? Read Answer
    • Vari - How do you remove the spare tire? Read Answer
    • Vari - How do you replace the hub pin of the car? Read Answer
    • Vari - Where are the TPMS located? Read Answer
    • Vari - Why doesn't the car wheel come off? Read Answer
    • Vari - What does 4 wheel drive mean? Read Answer
    • Vari - What does the acronym 4wd mean in Spanish cars? Read Answer
    • Vari - What should be the tightening value of the rear wheel hub nut? Read Answer
    • Vari - How do i remove the wheels of the Peugeot Speedfight 2? Read Answer
    • Vari - Why can't I remove the wheel? Read Answer
    • Vari - What is the tightening torque of the wheel bolts on a Chevrolet Kalos? Read Answer
    • Vari - Where is the spare wheel located? Read Answer
    • Vari - Wheel tightening torques on Volkswagen cars? Read Answer
    • Vari - Where can the tightening torques of the wheels be found? Read Answer
    • Vari - Where is the jack positioned to change the wheel? Read Answer
    • Vari - Where is the spare wheel located? Read Answer
    • Vari - Where is the wheel repair kit located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos