Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to rebuild the bodywork support of a car

Model: (Various brands) Various
Part: Body

Video tutorial

In this interesting video, we can see a rather simple method to rebuild the support for the installation of the bodywork of our car. If we have had a small accident, and the support that holds a part of the bodywork has broken, and this part is no longer in place, instead of supporting it with adhesive tape - always very unaesthetic - we can try this solution, much cleaner and more effective.

We will need a hot welder and a piece of mesh, in addition to hot glue and a piece of metal to make the base.

Welders can be found online, at all prices. Let it cool well and then put the piece of bodywork in place, on its rebuilt base.


Posted on 27 March 2025 by ScegliAuto


Related tutorials

Symptoms of an Engine with Worn Piston Rings
Symptoms of an Engine with Worn Piston Rings
(Various brands) Various This video teaches you how to protect yourself from a potentially risky purchase of a used car. If you hear the noise from this car, it may seem that…
How to Remove Badges from Your Car's Bodywork
How to Remove Badges from Your Car's Bodywork
(Various brands) Various In this video, see how to remove badges from your car's bodywork; not everyone likes them, and many prefer a clean body without metallic stickers. Yo…
Fitting the Rear Number Plate Holder on Our Car
Fitting the Rear Number Plate Holder on Our Car
(Various brands) Various Do you have the number plate holder in pieces? Let’s see how to replace the rear number plate holder on the car. Remove the securing screws of the nu…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos