Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan of Citroen and Peugeot vehicles

Model: (Various brands) Various
Part: Blower motor

Video tutorial

The operation for replacing the cabin fan of Citroen and Peugeot vehicles follows the same steps. To perform this operation, we must open the glove compartment on the passenger side and start the disassembly procedure.

We remove the bulb from the glove compartment, disassemble the light fixture and disconnect the connector from the bulb, unscrew the screws that hold the compartment in place and then remove it. We remove the hooks of the cover and proceed with the replacement of the fan. We disconnect the fan connector and unscrew the nuts that hold it in place.

We insert the new fan and mount the nuts and the connector.

We insert the glove compartment cover and then the compartment itself into its housing.


Posted on 16 April 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on Peugeot and Citroen Vehicles
How to Reset the Service Light on Peugeot and Citroen Vehicles
(Various brands) Various To complete the service on Peugeot and Citroen vehicles, follow these steps: - Turn on the ignition; - Press the "000" button located under the displ…
How to Replace the Front Headlamp Bulb on Peugeot and Citroen Vehicles
How to Replace the Front Headlamp Bulb on Peugeot and Citroen Vehicles
(Various brands) Various Replacing the right front headlamp bulb on Peugeot and Citroen vehicles involves simple and quick steps that you can do yourself. Open the bonnet and…
How to replace the battery of the key for Citroen and Peugeot vehicles
How to replace the battery of the key for Citroen and Peugeot vehicles
(Various brands) Various The remote controls of Peugeot and Citroen vehicles are very similar, so the replacement of the key battery follows the same procedure. We start by r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos