Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install a vehicle's rearview camera?

Model: (Various brands) Various
Part: Checks and maintenance

Only by using the object described in the description, during the reverse maneuver, you can appreciate how useful and comfortable it is. The protagonist of the video posted, presents a model that does not require any electrical connection, as it works with wireless connection and is very easy to install. In practice, it can be mounted in three ways on the rear of the vehicle: Through the magnet on its base, with screws and finally with Velcro. In the cabin, the screen is positioned and connected, to power it, to the cigarette lighter socket via the included cable.

Posted on 8 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to connect a rearview camera to an Android car radio
How to connect a rearview camera to an Android car radio
(Various brands) Various In this video, we can see how to connect a rearview camera to an Android car radio. The parts we have are: the rear camera, extension cables, power c…
How to install the backup camera
How to install the backup camera
(Various brands) Various This guide is about the general installation of an Android backup camera: we will see two identical AV cables, one connected to the AV input of the d…
How to Install a Number Plate Reverse Camera on Any Vehicle
How to Install a Number Plate Reverse Camera on Any Vehicle
(Various brands) Various Today, we will install a number plate reverse camera, which can be fitted to any vehicle. First, go to the back of the car and remove the number plat…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos