Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the electric window lift of the car?

Model: (Various brands) Various
Part: Side window

Video tutorial

Sometimes it may happen that by disconnecting the 12-volt power supply battery of the car or due to a momentary voltage surge, some programmed parameters may be lost, not allowing the normal use of certain equipment, such as the electric window. It is sufficient to carry out a reprogramming, in order to memorize the up and down movement of the window, all to be done easily, in fact watching the video available here we have confirmation.

Doors closed, engine running, lower the window and hold down the button for three seconds, doing the same thing with the same window raised. This should be repeated for the windows of all the doors of the vehicle.


Posted on 11 August 2025 by ScegliAuto


Related tutorials

How to Reset the Electric Windows After Battery Change
How to Reset the Electric Windows After Battery Change
(Various brands) Various Resetting the electric windows may be necessary after replacing a car battery. The steps to follow are the same for all new generation car models. To…
How to unlock the MediaNav of the vehicle
How to unlock the MediaNav of the vehicle
(Various brands) Various Today, you will learn how to unlock the MediaNav of the vehicle when the installed programme does not match the new version. The first step is to dow…
How to remove the crank from the rear window of a car
How to remove the crank from the rear window of a car
(Various brands) Various In this video we can see an operation that is becoming less and less likely to occur, that is, the need to remove the crank of the rear window of a c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos