Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the windshield washer nozzles of the car

Model: (Various brands) Various
Part: Checks and maintenance

In this video we can see how to clean the windshield washer nozzles of our car. We know that filling the windshield washer reservoir with common water damages them, because limescale then builds up: of course we will have to use, in addition to the detergent, demineralized water. But if the damage has already been done, let's see how to clean them: we have to remove them from the hood, pressing the two tabs on the sides, after removing the liquid supply tube. We see two in the footage, very encrusted with limescale, so we put them in a container, soaking them in a limescale remover, and leave them there for at least half an hour, then rinse them under running water and reassemble them.

Posted on 5 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to clean the nozzles of the car's windshield washer
How to clean the nozzles of the car's windshield washer
(Various brands) Various When the nozzles for the windshield washer fluid are clogged with dirt, it is not necessarily necessary to replace them; today we will explain a simp…
How to Properly Clean the Windscreen Washer Nozzles
How to Properly Clean the Windscreen Washer Nozzles
(Various brands) Various If the windscreen washer nozzle on your car is blocked, the best way to clean it is not to poke it with a pin, as this can not only fail to clean it …
How to Fix Windscreen Washers That Spray Little
How to Fix Windscreen Washers That Spray Little
(Various brands) Various To fix the nozzles that spray little, the first step is to check that there is enough properly diluted fluid (50% demineralised water, 50% detergent)…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos