Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the DAB Antenna on a Car

Model: (Various brands) Various
Part: Antenna

Video tutorial

The DAB antenna allows you to quickly and dynamically store new stations on the car radio. Before installing the antenna, it is important to adhere the sticker to the windscreen that informs other drivers of our radio antenna.

Then install the internal antenna by sticking it to the windscreen. Remove the centre console to access the car radio using a star screwdriver and a flat screwdriver.

After unscrewing the locking screws, disconnect the radio connector by pulling it outwards. Next, connect the antenna cable to the car radio, inserting the cable inside the dashboard and then into the radio.

Connect the antenna cable to the radio and mount the radio in its housing. Turn on the car radio and store the channels just received.


Posted on 9 February 2026 by ScegliAuto


Related tutorials

How to Connect a DAB Antenna in a Car
How to Connect a DAB Antenna in a Car
(Various brands) Various Here’s how to connect a DAB antenna in your car. The components of the antenna are the copper plate, the adhesive membrane, the control unit, and the…
How to Install the Short Carbon Antenna from QualitySpCars in Place of the Standard Antenna
How to Install the Short Carbon Antenna from QualitySpCars in Place of the Standard Antenna
(Various brands) Various This guide shows how to install the QualitySpCars short carbon antenna. This operation does not require dismantling any part of the vehicle except fo…
How to Install a New DAB Antenna in Your Car.
How to Install a New DAB Antenna in Your Car.
(Various brands) Various In this video tutorial, you can see how to install a new DAB antenna in your vehicle by following a few simple steps that will guide you towards prop…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos