Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore Unpainted Plastic Bumpers

Model: (Various brands) Various

Unpainted plastic bumpers often fade after a few years due to sun exposure. You can restore them using specific products or a heat gun. To save money, after cleaning the affected areas, use a heat gun for a few passes, and you will notice an immediate improvement. However, not all types of plastic are the same, so proceed with caution, starting from a less visible part of the car and setting the heat gun to a minimum before gradually increasing the temperature if necessary. Using a heat gun requires attention due to high temperatures, so avoid lingering on the same spot and protect adjacent parts like headlights, stop lights, and other painted areas.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Restore Unpainted Plastic Bumpers on Your Car
(Various brands) Various Let's see how to use the product for cleaning and removing scratches from unpainted bumpers and plastic parts. Apply the bumper black on the part to …
How to Repair a Deformed Plastic Bumper
How to Repair a Deformed Plastic Bumper
(Various brands) Various In this video, learn how to repair a deformed plastic bumper: low cost but a lot of work. Remove the lower part of the bumper by taking off the splas…
How to Connect the Dash Cam Wiring Kit
How to Connect the Dash Cam Wiring Kit
(Various brands) Various Learn how to connect the permanent wiring kit of a dash cam so that it operates normally when the engine is running; it enters parking mode (recordin…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos