|
Do it yourself
| |||
| ||||
How to Repair and Reset the Diesel Particulate Filter Warning Light
Model: (Various brands) Various
Video tutorial
In this video, you will learn how to interpret, repair, and reset the DPF warning light: if the light is a steady amber, the DPF is 45% to 85% full, and the car is requesting an active regeneration. This is not an emergency, but you need to address it by attempting a regeneration while driving. If the light is amber and flashing, the DPF is over 85% full, and regeneration must be immediate. If it does not turn off, a technical intervention is required. If the light is red (or the engine light is on as well), the DPF is completely blocked, and the power limiter is activated. You must stop and call for a tow. DIY regeneration is done by driving for 20 to 30 minutes on the motorway at 2,500 to 3,000 RPM, with the engine already warm.
Posted on 30 March 2026 by ScegliAuto
Related tutorials
(Various brands) Various
In this video tutorial, you can see how to clean the diesel particulate filter with Warm Up additive: if your car has covered over 62,000 miles, the …
(Various brands) Various
This short video tutorial explains how the diesel particulate filter works: if you have a car with a diesel engine, you have likely seen the DPF ligh…
(Various brands) Various
On any diesel vehicle, regardless of mileage, there is a manual method to perform a "manual" regeneration of the diesel particulate filter (DPF). You…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |