Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Windscreen Washer Fluid

Model: (Various brands) Various
Part: Checks and maintenance

Let's see how to perform maintenance on your car yourself to save on labour costs. Pull the plastic lever located at the bottom left of the dashboard, lift the bonnet and secure it. Next, locate the cap for topping up the washer fluid and remove it. Use a funnel to top up the washer fluid; tighten the cap back on the reservoir and close the bonnet after maintenance. Test the correct operation of the wiper blades and the fluid dispenser by starting the car.

Updated on 9 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Antifreeze for the Windscreen Washer Reservoir
Antifreeze for the Windscreen Washer Reservoir
(Various brands) Various It is common to fill the windscreen washer reservoir with just water, which is a mistake for several reasons: - Water does not provide adequate clean…
How to Save on Screenwash Fluid Purchase
How to Save on Screenwash Fluid Purchase
(Various brands) Various Sometimes the costs for maintaining our vehicles can be quite significant, so it’s wise to find ways to save when possible. This brief video tutorial…
How to Check Fluid Levels
How to Check Fluid Levels
(Various brands) Various Before embarking on a journey, it is advisable to check the levels of all the car fluids to top up if necessary. The first fluid to check is the oil.…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos