Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Onboard Computer on an Aixam

Model: (Various brands) Aixam
Part: Onboard computer

Video tutorial

Let's see how to set the onboard computer on an Aixam: turn on the ignition; to reset the trip meter, hold down the left button; to activate the hazard lights, press the right button for 10 seconds (within 15 seconds of starting the ignition). To preheat the engine, use the same procedure but with the left button.

To change the units of measurement (miles/km) with the vehicle off, hold down the left button while turning on the vehicle: the miles unit is linked to the 12-hour format and the kilometres unit to the 24-hour format. To set the time, start the engine and hold down the right button until the hour flashes; briefly press to adjust hours and minutes and hold to exit the mode.

To adjust the brightness of the instrument panel, turn on the lights to switch to night mode; briefly press the right button to adjust the brightness (8 levels). To reset the maintenance, hold down both buttons for six seconds (only works after driving 5,000 km).


Posted on 12 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on an Aixam Vehicle
How to Reset the Service Light on an Aixam Vehicle
(Various brands) Aixam Today, for the first time, you will learn how to reset the service light on an Aixam vehicle. The reset procedure for this type of microcar should be…
Guide to Using the Aixam Mega Van
Guide to Using the Aixam Mega Van
(Various brands) Aixam This short and simple guide will show you how to start the engine and operate the automatic gearbox of the Aixam Mega Van. First, get in the vehicle …
How to Reset the Service Light on the Aixam 50
How to Reset the Service Light on the Aixam 50
(Various brands) Aixam Today's instructions will allow us to reset the service light for the regular maintenance oil change on the Aixam 50. First, get into the vehicle and…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos