Do it yourself
Frequently asked questions about cars and motorcycles

Wiring Diagram for a One-Wire or Two-Wire Alternator

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

Let's look at how a one-wire alternator works: the alternator has one cable connected, which is the positive terminal that goes directly to the positive side of the battery. The circuit is completed through the engine ground and the battery.

The alternator self-excites when it starts to spin. Installation is very simple and ideal for basic vehicles like tractors, boats, and classic cars.

The two-wire alternator has a thick wire and a thin one. The thin wire is used to excite the alternator at startup (via the ignition key) and to turn on the battery warning light on the dashboard if the alternator is not charging. When the alternator is charging, the light goes out (voltage equal on both sides).


Posted on 7 October 2026 by ScegliAuto


Related tutorials

(Various brands) Various Here we see a wiring diagram for the radiator fan, which varies slightly depending on the car model, but the basic principle is similar for most vehi…
(Various brands) Various In this new tutorial video, you can see how to adapt the connectors on a universal lambda sensor by following a few simple steps. First, obtain an in…
(Various brands) Various In this video, you will see how to bench test the functionality of a 12-volt alternator. You will need a drill with socket adapters, a battery with i…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer
    • Vari - Is the Keeway rkf 125 a bike with particular problems? Read answer

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos