|
Do it yourself
| |||
| ||||
How to Change the Engine Oil on an Aixam
Model: (Various brands) Aixam
Video tutorial
To change the oil on a Microcar Aixam, you will need 1.7 litres of 10W40 oil. Lift the car, remove the soundproofing material from the underside, locate the drain plug, place a container underneath, and allow the oil to drain out. Then replace the plug and washer with new parts. In the engine compartment, remove the grille in front of the filter and use pliers to remove the old filter. Clean the seating area, lubricate the filter gasket with a bit of new oil, and screw on the new filter by hand. Remove the filler cap, pour in the new oil, and replace the cap. Start the engine for a few minutes, then wait about 20 minutes to allow the oil to settle, and check the oil level, which should be between "min" and "max". Refit the grille and soundproofing material, and you’re done.
Posted on 20 November 2026 by ScegliAuto
Related tutorials
(Various brands) Aixam
The mechanic in the video shows how to service Aixam vehicles. The procedure is not much different from that performed on other types of vehicles and…
(Various brands) Aixam
On the Aixam City, the oil change should be performed with the engine warm to facilitate draining. Place the Aixam City on a flat surface, lift the r…
(Various brands) Aixam
Today's instructions will explain the process of resetting the maintenance service light (oil change) on the Aixam City. First, we get into the car a…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |