Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing a Faulty Interior Light from the Car

Model: (Various brands) Various
Part: Interior dome light bulb

Let's see how to remove a faulty, broken interior light from the car. Use a screwdriver to pry between the light lens and the plastic edge (without breaking the plastics). Unscrew the screws of the light and remove it from the panel (disconnect the power connector). Replace the damaged bulb with a new one (same size and voltage). Reconnect the electrical connector, screw in the securing screws (press the transparent plastic with your hands until the tabs lock into the side plastic). Test the interior light's functionality simply by pressing the buttons.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Central Interior Light Bulbs
Replacing the Central Interior Light Bulbs
(Various brands) Various Want to replace the bulbs inside the car's interior light? See how to remove the light and replace the damaged bulb. Pry between the light and the co…
How to Extract a Broken Key from a Lock
How to Extract a Broken Key from a Lock
(Various brands) Various The video we see is not specific to a vehicle, but the situation can also occur in a car. In fact, if it happens in a car, it is particularly critica…
Removing Universal Car Antenna
Removing Universal Car Antenna
(Various brands) Various Remove the universal antenna from your car. Take off the interior light or the trim panel at the rear of the car (depending on whether the antenna is…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos