Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Central Interior Light Bulbs

Model: (Various brands) Various
Part: Interior dome light bulb

Want to replace the bulbs inside the car's interior light? See how to remove the light and replace the damaged bulb. Pry between the light and the cover lens (without breaking the lens). Pull the cover lens out from the interior of the light, then remove the bulb from inside. Remove the light if you want to replace it with a new one: disconnect the power connector. Replace the damaged bulb with a new one (same size and voltage). Refit the light in its housing or the lens depending on how it was removed (push the transparent plastic with your hands until the tabs are fully locked into the side plastic).

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Car Courtesy Lights
Removing Car Courtesy Lights
(Various brands) Various Let’s see how to remove the car's courtesy lights. Remove the transparent cover to replace the bulbs or to take down the entire light unit. Pry betwe…
How to replace the interior light on a vehicle
How to replace the interior light on a vehicle
(Various brands) Various The replacement of the bulb of the interior light fixture on a vehicle follows some simple and quick steps to be carried out independently. We start …
Replacing Car Interior Light Bulbs
Replacing Car Interior Light Bulbs
(Various brands) Various Do you want to remove the interior light of your car? Here's how to take down the light fixture to change the bulbs. Pry between the light fixture an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos