Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Battery Replacement

Model: (Various brands) Various
Part: Battery

In this video tutorial, you will learn how to replace your car's battery. Replacing the battery requires some important precautions and can sometimes be complicated in certain models as it may require removing many other parts; but let's observe the procedure. First, lift the bonnet and remove any cable management unit found above the battery: then unscrew the nuts of the battery terminals and remove the cables. The battery is usually secured by a bracket: unscrew the bolt or release the lever below to extract and replace it!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Unibox on a Car?
How to Install the Unibox on a Car?
(Various brands) Various Before starting, open the bonnet of your car. Begin by unclipping and removing the upper battery cover. Next, slightly loosen the two terminals conne…
Replacing the Car Key Battery
Replacing the Car Key Battery
(Various brands) Various How do you change the battery in your car key? Let’s look at the disassembly and replacement of the damaged battery. Open the bonnet and locate the b…
How to Install the Unibox on a Car?
How to Install the Unibox on a Car?
(Various brands) Various Before starting, open the front bonnet of your car. First, unclip and remove the battery cover. Next, loosen the nuts securing the two terminals to t…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos