Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Your Car Battery

Model: (Various brands) Various
Part: Battery

In this video tutorial, you will see how to replace your car battery by following a few simple steps. First, purchase a battery with the same amperage as the one currently fitted in your car; you will need a 13 mm spanner with an extension and a 10 mm spanner to remove the terminals. Start by disconnecting the negative terminal to avoid short circuits and damage to the car's electrical system. Once the negative terminal is removed, proceed to disconnect the positive terminal as well. Using the 13 mm spanner, unscrew the bolt at the base of the battery that keeps it in place. At this point, you can extract the battery from its housing and replace it with the new one.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Recharge Your Car Battery
How to Recharge Your Car Battery
(Various brands) Various Sometimes, your car may not start due to electrical issues, such as a flat battery. First, check that the terminals connecting the cables to the batt…
How to Replace a Car Battery
How to Replace a Car Battery
(Various brands) Various In this video tutorial, you can see how to replace a car battery. The first thing you need to do is buy a battery that has the same Amperage as the o…
Replacing the Car Key Battery
Replacing the Car Key Battery
(Various brands) Various How do you change the battery in your car key? Let’s look at the disassembly and replacement of the damaged battery. Open the bonnet and locate the b…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos