Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Wiper Motor

Model: (Various brands) Various
Part: Windshield wipers

Let’s see how to remove the front wiper motor. Lift the front bonnet and locate the plastics that need to be removed. Dismantle the wiper arms. Once the arms are removed, take off the plastic cover: unclip or unscrew the screws. Using a socket wrench, unscrew the lower plastic panel and remove the wiper motor. Replace the part you removed with a new original one: connect the electrical terminals to the new wiper motor, tighten the securing screws, and refit the covers.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Here’s how to replace the rubber blade (i.e., the wiper) of the windscreen wiper, rather than the entire arm. Take the wiper arm and detach it from t…
(Various brands) Various In this short video tutorial, learn how to replace the rubber on the new models of wiper blades without needing to replace the entire unit. The opera…
(Various brands) Various Is the rear wiper blade of your car broken? Let's see how to remove the rear blade. Grasp the front wiper blade with your hands and gently pull it of…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos