Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to reset the "Service" light on an Abarth 595

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Checks and maintenance
Operation: How to reset the "Service" light on an Abarth 595

Before starting, we will have to make sure that the service has actually been carried out, and then we will have to sit on the driver's seat of our Abarth 595. Let's start by activating the instrumentation, turning the key to position one. In the first 10 seconds in which the car has the instrumentation on, we will have to press the accelerator pedal all the way down 3 times. Once we have pressed the accelerator pedal three times, we will have to go and turn off the instrument panel. When we go to turn it on again, the "Service" light will be off, and the reset will be completed.


Posted on 9 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Vari - What does it mean when the "Hill Hold Control" system is not available? Read Answer
    • Vari - What does x100 mean? Read Answer
    • Vari - Why is the trunk of the Mercedes locked? Read Answer
    • Vari - What does the illuminated ABS light indicate on the Kymco Downtown 300I? Read Answer
    • Vari - When does the message SRS FAULT VISIT WORKSHOP appear in Mercedes cars? Read Answer
    • Vari - What does the spring-shaped indicator light indicate? Read Answer
    • Vari - What does the glow plug indicator on Mercedes indicate? Read Answer
    • Vari - What do the red lights on Harley Davidsons indicate? Read Answer
    • Vari - Why is the fuel cap locked? Read Answer
    • Vari - What does code 84 mean in Opel? Read Answer
    • Vari - What should you do if the remote control of a Volkswagen car is not working? Read Answer
    • Vari - What is the position of the oil drain plug in the Yamaha YZ450GF? Read Answer
    • Vari - Why does the engine malfunction light turn on in the Piaggio Vespa GTS 300? Read Answer
    • Vari - What does the term "Passive entry" in Jeeps indicate? Read Answer
    • Vari - What does the Service light on the MG 6 indicate? Read Answer
    • Vari - What does the EDC warning light indicate in an Iveco vehicle? Read Answer
    • Vari - What problems does the Piaggio MP3 400 have? Read Answer
    • Vari - How often should the Ducati Scrambler be serviced? Read Answer
    • Vari - What is the cost of a service for the Yamaha Majesty 400? Read Answer
    • Vari 2019-2026 - Why won't the Fitbit Versa dashboard turn on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos