Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light Bulbs

Model: (Various brands) Various
Part: Tail light bulb

How do you remove the rear light and replace the bulbs? Start by lifting the boot. Locate the trim on the side of the compartment. Remove the fabric cover on the side trim of the boot, disconnect the power connectors attached to the light, and pull it out of its housing. Replace any damaged bulbs with new ones (same voltage) at hand. Refit the light with the respective securing nuts. Replace the rear light if it is irreparably damaged. Refit the various covers of the boot once the replacement is complete.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlamp Bulb of the Car
Replacing the Rear Headlamp Bulb of the Car
(Various brands) Various Replacing the rear headlamp bulbs of the car? Open the boot to access the headlamp. Use a screwdriver to remove the securing screws located at the si…
Replacing Car Headlight Bulbs
Replacing Car Headlight Bulbs
(Various brands) Various Do you want to remove the front headlight bulbs? Let's look at how to disassemble the front headlight bulbs. Lift the bonnet, locate the inspection c…
Replacing the Front Headlamp Bulb
Replacing the Front Headlamp Bulb
(Various brands) Various How to replace the front headlamp bulbs of your car? Follow these steps to change the bulbs. Lift the cover of the engine compartment and secure it. …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos