Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen?

Model: (Various brands) Various
Part: Windshield

The first step is to unscrew the bolts holding the wipers and remove them. Once this step is complete, you will need to remove the plastic trim usually found at the bottom of the windscreen. This may require unscrewing, but sometimes it is just clipped in. Next, you will need to remove the adhesive holding the glass in place. To do this, you can use a wire introduced from the outside to the inside, which you will then need to slide along the entire perimeter. Finally, to remove the windscreen, apply the suction cups to it, and by pulling, you will have successfully removed it.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Windshield Replacement for Your Car
Windshield Replacement for Your Car
(Various brands) Various In this video, learn how to remove the windshield from your car. First, open the bonnet and remove the plastic cover located under the windshield, th…
How to Replace the Windscreen
How to Replace the Windscreen
(Various brands) Various First, apply the complete seal to the new windscreen that has not yet been installed. Now, remove the external seal present on the windscreen install…
How to remove the Telepass holder from the car windshield
How to remove the Telepass holder from the car windshield
(Various brands) Various The Telepass holder is usually attached to the car windshield in order to ensure that the Telepass works immediately when passing through toll gates.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos