Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Antenna with a Shark Fin Antenna?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

To replace the car antenna with a shark fin antenna, first unscrew the old antenna from your vehicle. Clean the bodywork around the base of the old antenna with a damp cloth and screw the receiver cable of the new shark fin antenna to it. Now position the shark fin antenna, which will be secured with adhesive tape, usually provided with the replacement.

Hold the antenna lightly until the adhesive tape adheres to the bodywork, ensuring a secure fit.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Fitting a Universal Car Aerial
Fitting a Universal Car Aerial
(Various brands) Various This tutorial can be used for any vehicle you own, as long as it has a traditional aerial. We will replace it with a universal aerial known as a 'sha…
How to Replace the Antenna
How to Replace the Antenna
(Various brands) Various Performing this task will not be complicated at all, as you will not need any special tools. Just follow this simple and quick guide. First, locate t…
How to Change the Antenna on Your Car to a Shark Fin Type
How to Change the Antenna on Your Car to a Shark Fin Type
(Various brands) Various In this video, you will see how to change the antenna on your car to a shark fin type. In this case, since the previous antenna is much smaller than …

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos