Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Impact Sensor?

Model: (Various brands) Various
Part: Checks and maintenance

To remove the front impact sensor of the car, first, remove the front bumper and the left front headlamp by unscrewing the relevant securing screws and connectors. The sensor is generally located under the left front headlamp. In this case, it is connected to a yellow connector that must be released using a screwdriver. Once the connector is disconnected, loosen the torx screws securing the connector to the bodywork. When these are loosened, you can remove it, replace it, and connect it to the relevant connector.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What to do when a car has been involved in a frontal collision
What to do when a car has been involved in a frontal collision
(Various brands) Various When your car suffers a frontal impact, the fear is that the vehicle may not be able to return to its original state, and that the chassis may someho…
How to replace the vehicle's tire pressure sensor
How to replace the vehicle's tire pressure sensor
(Various brands) Various Today we will explain how to independently replace the tire pressure sensor on the wheels of a vehicle. The sensors must be replaced when they stop w…
How an Inertia Switch (or Impact Sensor) Works
How an Inertia Switch (or Impact Sensor) Works
(Various brands) Various The physical principle of the inertia switch is based on the law of inertia (the first principle of dynamics) whereby a body tends to maintain its st…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos