Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light

Model: (Various brands) Various
Part: Tire pressure warning light

Video tutorial

In this video tutorial, you can see how to reset the tyre pressure warning light by following a few simple steps that will guide you towards proper vehicle management. The tyre pressure warning light reset should only be done when the light is illuminated and does not turn off; therefore, only after checking that the tyres are properly inflated and there are no damages or punctures.

If this happens while you are driving, the first thing you should do is head to the nearest service area to use the compressor and restore the tyre pressure. Once you have inflated all the tyres, turn on the ignition and the light should automatically turn off; if it does not, press and hold the button with the round brackets and the exclamation mark (!) for a few seconds.

Reset completed.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Pontiac Torrent
How to Reset the TPMS Light on a Pontiac Torrent
(Various brands) Various The tyre pressure monitoring system light on GM vehicles activates when it is necessary to adjust the tyre pressures. Each vehicle has its own reset …
How to Perform TPS Reset on AIM ECU
How to Perform TPS Reset on AIM ECU
(Various brands) Various To perform the TPS reset on an AIM Taipan ECU, follow this procedure with the engine off. Press the power button and the off button simultaneously; a…
How to Reset the Service on a Piaggio MP3 500
How to Reset the Service on a Piaggio MP3 500
(Various brands) Various In this video tutorial, you can see how to reset the service on a Piaggio MP3 500. The first thing to do before resetting the service, if the service…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos