Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Standard Antenna with a Shark Fin Antenna on Any Car

Model: (Various brands) Various
Part: Antenna

Video tutorial

The installation is straightforward. Start by sanding your new shark fin antenna to ensure a proper fit on the roof of your car. Next, paint the antenna as you prefer.

Remove the old antenna, then take your new antenna which has a cable inside that needs to be connected to the antenna screw using two nuts. Apply double-sided tape to your shark fin antenna, ensuring it adheres well.

Place a nut on the antenna screw, connect the cable, and secure it with the other nut; tighten everything with a spanner. Remove the protective cover from the double-sided tape and firmly attach it to your car's antenna.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Car Antenna with a Shark Fin Antenna?
How to Replace the Car Antenna with a Shark Fin Antenna?
(Various brands) Various To replace the car antenna with a shark fin antenna, first unscrew the old antenna from your vehicle. Clean the bodywork around the base of the old a…
Installation of a shark fin antenna
Installation of a shark fin antenna
(Various brands) Various In this video, we will see how to install a shark fin antenna on a car that had a regular antenna with a mast. Let's start by unscrewing the mast: we…
How to Install a Shark Fin Antenna on My Car?
How to Install a Shark Fin Antenna on My Car?
(Various brands) Various Shark fin antennas are very popular among those who want to give their car a sportier look and prefer them over the classic whip antenna. If you are …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos