Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light

Model: (Various brands) Various
Part: Tire pressure warning light

In this tutorial video, you can see how to reset the tyre pressure warning light. If the pressure light comes on, the issue may be a tyre that is over-inflated or under-inflated, so to avoid accidents, stop at a petrol station and check the tyre pressures, or if you have a compressor at home, you can do it there: (check the pressure only when the tyres are cold and not when they are hot, as hot tyres can increase the pressure. To know the ideal pressure for your vehicle, simply look at the label on the door pillar or inside the door. Once the tyre pressure issue is resolved, get in your car, insert the key, and turn on the ignition; now press and hold the button with the symbol (!) labelled (SET) for a few seconds until the reset is complete.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light in Your Car
How to Reset the Tyre Pressure Warning Light in Your Car
(Various brands) Various .. This video will show you how to reset the tyre pressure warning light in your car (in this case, it’s a Toyota, but the process i.. …
How to Reset the Tyre Pressure on the Scion tC
How to Reset the Tyre Pressure on the Scion tC
(Various brands) Various To reset the tyre pressure on the Scion tC, turn on the instrument cluster without starting the engine, and note the warning light for low tyre press…
How to Reset the TPMS Warning Light
How to Reset the TPMS Warning Light
(Various brands) Various Turn the key to the On position without starting the engine. Press the TPMS reset button and hold it until the light flashes three times, then releas…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos