Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the 2008 Scion XB

Model: (Various brands) Various
Part:

To complete the manual reset of the tire pressure light on your 2008 Scion XB, it only takes a few seconds. First, enter the interior of the car and reach the driver's seat, then start the instrument panel and locate the button located in the lower area of the dashboard. It is a small button with the tire pressure light icon on it. Once you have found the button, hold it down and wait for the reset of the light to be completed. Finally, release the button and turn off the car's ignition to complete the procedure.

Posted on 10 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure on the Scion tC
How to Reset the Tyre Pressure on the Scion tC
(Various brands) Various To reset the tyre pressure on the Scion tC, turn on the instrument cluster without starting the engine, and note the warning light for low tyre press…
How to reset the TPMS light on the Scion XB
How to reset the TPMS light on the Scion XB
(Various brands) Various On Scion XB vehicles, the TPMS light turns on when the tire pressure needs to be adjusted. Only after adjusting the tire pressure can the TPMS light …
How the Tyre Pressure Sensor Works
How the Tyre Pressure Sensor Works
(Various brands) Various In this video, you can see how the tyre pressure warning light works. If the tyre pressure warning light (!) comes on, it means that one tyre is losi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos