Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on the Scion tC

Model: (Various brands) Various
Part: Tire pressure warning light

Video tutorial

To reset the tyre pressure on the Scion tC, turn on the instrument cluster without starting the engine, and note the warning light for low tyre pressure; before resetting it, go outside the car and check that all tyres are at the pressure indicated by the manufacturer.

Then, open the glove compartment on the passenger side and find the button to reset this warning light, which has the same symbol as the light on the instrument cluster; press and hold this button until the low tyre pressure light turns off, and finally, you can close the glove compartment.


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on the Scion XB
How to Reset the TPMS Light on the Scion XB
(Various brands) Various In Scion XB vehicles, the TPMS light comes on when it is necessary to adjust the tyre pressure. Only after this can you reset the TPMS light. To perf…
How to Reset the Tyre Warning Light on a 2008 Scion XB
How to Reset the Tyre Warning Light on a 2008 Scion XB
(Various brands) Various To manually reset the tyre warning light on your 2008 Scion XB, you only need a few seconds. First, enter the cabin and reach the driver's seat, then…
How to Replace the Remote Battery in a Scion iA?
How to Replace the Remote Battery in a Scion iA?
(Various brands) Various Replacing the remote battery in a Scion iA, as shown in this tutorial, is an extremely simple and quick operation. You will need a small flat-head sc…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos