Do it yourself
Frequently asked questions about cars and motorcycles

Where is the battery located and how to change it on an Aixam City?

Model: (Various brands) Various
Part: Battery

Video tutorial

The battery of the Aixam City is located in the cabin, covered by a plastic shield. To access it, open the passenger door and beneath the dashboard, you will see the bolts that hold the cover.

Using a socket wrench, unscrew the two side nuts with washers and remove the cover. To replace the battery, pull it out and disconnect the terminals, starting with the positive terminal and then the negative.

The battery model used is a cube type with a voltage of 12V and an amperage comparable to a small city car. Finally, to reinstall the battery and cover, reverse the disassembly steps. If you have doubts about the suitable battery model, consult the user manual and ask your trusted parts supplier.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

(Various brands) Various In this video, you can see how to reset the oil change light on an Aixam City quadricycle. On the instrument panel, you will find two buttons, one at…
(Various brands) Various In this brief guide, discover how to reset the service light for the routine maintenance oil change on the Aixam 50 cc. First, get in the vehicle and…
(Various brands) Various Do you want to replace the fuses on an Aixam car? Let's see where to find the fuse box. Open the car door, lift the bonnet, and secure it. Using a sc…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the battery located in the Sym Jet X? Read answer
    • Vari - Where is the battery located in the Piaggio Beverly? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer
    • Vari - Where is the battery of my Piaggio Medley 150? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos