Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to clean a chainsaw oil pump.

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Engine oil
Operation: How to clean a chainsaw oil pump.

In this video you can see how you can clean the oil pump of a chainsaw. First you need to remove the chain cover to clean the bar and chain; you can degrease them with petrol and a brush, as shown in the video. You have to free the exit hole from residues of lubricant, dust etc. Always keep the oil pump tank clean, before refueling, remove the dirt all around the cap. Put some petrol in the oil tank and run the chainsaw for a while to clean the pump and its circuit. Empty the tank and fill it with chain oil.


Posted on 18 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Vari - How much oil is needed for the Harley-Davidson Fat Boy? Read Answer
    • Vari - When should the oil be replaced in the Suzuki Bandit 1250? Read Answer
    • Vari - How much engine oil is needed for the Piaggio Vespa ET4 125? Read Answer
    • Vari - How do you open the engine oil cap? Read Answer
    • Vari - How much engine oil does the Ducati Scrambler 800 require? Read Answer
    • Vari - How much engine oil is required for the Mercedes E 320 CDI? Read Answer
    • Vari - How many liters of oil to put in the Triumph Street Triple 675? Read Answer
    • Vari - How much oil should be added to the Peugeot Satelis 125? Read Answer
    • Vari - When should the engine oil be changed? Read Answer
    • Vari - How many liters of oil are needed for an oil change? Read Answer
    • Vari - How much does it cost to repair an oil leak? Read Answer
    • Vari - How much engine oil does the Yamaha Virago 535 contain? Read Answer
    • Vari - What is the correct amount of engine oil for the Piaggio Vespa 300 GTS? Read Answer
    • Vari - What does the engine oil warning light indicate on the Yamaha T max 530 dx? Read Answer
    • Vari - How much engine oil is needed for the replacement on the Honda 450 CRF? Read Answer
    • Vari - How much oil should I add to the KTM 50 Sx? Read Answer
    • Vari - How much engine oil is needed for the Guzzi Nevada 750? Read Answer
    • Vari - What is the amount of motor oil needed for a 1.4 HDI 70hp engine? Read Answer
    • Vari - Why is the oil light of the Iveco flashing? Read Answer
    • Vari - How often should the oil be changed in the Piaggio Beverly 300 scooter? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos