Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a SH 125

Model: (Various brands) Various
Part: Service warning light

In this tutorial, you will see how to reset the oil change light by following a few simple steps for proper vehicle maintenance. First, turn the key to ON to check that the oil light is illuminated, and the instrument panel will show the light saying "OIL CHANGE". Switch the key to OFF. Pour 1 litre of Motul 5100 10w40 oil using the appropriate nozzle, ensuring the level reaches the maximum mark on the dipstick. Once you have changed the oil, turn the key to ON, press and hold the button located under the speedometer; then turn off and turn on the ignition to check that the light is off.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Kymco Agility 125
How to Reset the Oil Change Light on the Kymco Agility 125
(Various brands) Various If you have changed the oil on this type of scooter yourself, you need to complete the job by resetting the oil change light that has illuminated on …
How to Reset the Oil Light on the Sym Symphony 125
How to Reset the Oil Light on the Sym Symphony 125
(Various brands) Various After replacing the engine oil on this scooter, you need to reset the warning light that has illuminated on the instrument panel, indicating an oil c…
How to Reset the Oil Light on the Kymco Agility 125
How to Reset the Oil Light on the Kymco Agility 125
(Various brands) Various If you need to reset the service light that has illuminated on the dashboard indicating that an oil change is necessary on this motorcycle, follow th…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos