Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Kymco Agility 125

Model: (Various brands) Various
Part: Service warning light

If you need to reset the service light that has illuminated on the dashboard indicating that an oil change is necessary on this motorcycle, follow the instructions provided in this description and refer to the images in the video. First, turn on the ignition and press the button located on the lower left of the dashboard twice in quick succession. Then press both buttons located at the bottom of the dashboard and hold them until the oil change light turns off. Finally, turn off and then turn on the ignition again to verify that the light has indeed turned off.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Kymco Agility 125
How to Reset the Oil Change Light on the Kymco Agility 125
(Various brands) Various If you have changed the oil on this type of scooter yourself, you need to complete the job by resetting the oil change light that has illuminated on …
How to Reset the Oil Change Light on the Kymco Agility 125
How to Reset the Oil Change Light on the Kymco Agility 125
(Various brands) Various After performing the oil change service and replacing the filter on the motorcycle, you will need to clear the oil change warning on the dashboard. T…
How to Replace the Rear Suspension on a Kymco Agility 125
How to Replace the Rear Suspension on a Kymco Agility 125
(Various brands) Various This tutorial shows how to replace the rear suspension on a Kymco Agility 125 in a few simple steps. The suspension is difficult to reach from behind…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos