Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on the Kymco Agility 125

Model: (Various brands) Various
Part: Service warning light

After performing the oil change service and replacing the filter on the motorcycle, you will need to clear the oil change warning on the dashboard. To do this, follow the instructions below, which refer to the video. First, insert the key into the ignition and turn on the ignition. Then, using the left button on the dashboard, press it multiple times until the service warning appears. To reset it, press both buttons on the dashboard simultaneously and wait a few seconds until the service indication is reset.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on the Kymco Agility 125
How to Reset the Oil Change Light on the Kymco Agility 125
(Various brands) Various If you have changed the oil on this type of scooter yourself, you need to complete the job by resetting the oil change light that has illuminated on …
How to Reset the Oil Light on the Kymco Agility 125
How to Reset the Oil Light on the Kymco Agility 125
(Various brands) Various If you need to reset the service light that has illuminated on the dashboard indicating that an oil change is necessary on this motorcycle, follow th…
How to Replace the Rear Suspension on a Kymco Agility 125
How to Replace the Rear Suspension on a Kymco Agility 125
(Various brands) Various This tutorial shows how to replace the rear suspension on a Kymco Agility 125 in a few simple steps. The suspension is difficult to reach from behind…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos