Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Float on a Submersible Pump

Model: (Various brands) Various

Remove the submersible pump and place it on a stable surface. Using a suitable socket spanner, unscrew the nuts on the top cover and then remove the top cover. Underneath, the electrical wiring and the float will be visible. Remove the connector caps from the wires and then disconnect the float after unscrewing the earth screw. Pull the float connection cable from the cover and replace it with the new one. Subsequently, reconnect the wires and the earth. Reposition and secure the top cover with the nuts.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

What to Do If There Is No Power to the Float Pump?
What to Do If There Is No Power to the Float Pump?
(Various brands) Various To understand why there is no power, first, you need to know how a float pump works. As shown in the video, a traditional float has three conductors …
How to Replace the Toilet Float
How to Replace the Toilet Float
(Various brands) Various If you want to extend your DIY skills to home repairs, particularly in the bathroom, you can attempt to replace the toilet float when you notice wate…
How to Check the Operation of the Fuel Pump (Float)
How to Check the Operation of the Fuel Pump (Float)
(Various brands) Various In this video, you will see how to check the operational status of the electric fuel pump or the submerged float pump in the fuel tank of your vehicl…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos