Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Toilet Float

Model: (Various brands) Various

If you want to extend your DIY skills to home repairs, particularly in the bathroom, you can attempt to replace the toilet float when you notice water leaks. Here’s what to do: First, turn off the water supply, then unscrew the nut at the float's inlet using two adjustable pliers. After detaching the old float, take the new float and insert it into the mounting hole, then re-screw the securing nuts while holding the float in place with one hand. For the float ball, you can reuse the old one and mount it onto the new float's arm by tightening the provided screw. Finally, reattach the water supply pipe to the float body, and you're done.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Tank Float
How to Replace the Fuel Tank Float
(Various brands) Various In this video, you will learn how to replace the fuel tank float. To access the float housing, you need to remove the rear seats. Next, remove the ca…
What to Do If There Is No Power to the Float Pump?
What to Do If There Is No Power to the Float Pump?
(Various brands) Various To understand why there is no power, first, you need to know how a float pump works. As shown in the video, a traditional float has three conductors …
How to Dismantle and Repair the Fuel Float in Your Car
How to Dismantle and Repair the Fuel Float in Your Car
(Various brands) Various This short video explains how to dismantle and repair the fuel float in your car if it is no longer functioning correctly. The fault may be due to ox…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos