Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to Do If There Is No Power to the Float Pump?

Model: (Various brands) Various
Part: Checks and maintenance

To understand why there is no power, first, you need to know how a float pump works. As shown in the video, a traditional float has three conductors (you can replace it with a two-conductor float). When the water level is insufficient, the float remains in an open contact position, preventing the pump from starting. If the water level is sufficient, the float closes the contact to allow the pump to operate. The three-contact float can be used for tanks and reservoirs. In short, when there is no power to the float, first check its condition and the water level, and remember that the best course of action is to ask for help from your trusted mechanic.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Schematic diagram of the fuel level indicator in a car.
Schematic diagram of the fuel level indicator in a car.
(Various brands) Various The path of electricity, as shown in our diagram, is as follows: from the 12-volt battery, we go to the indicator, which has two terminals: power inp…
How to Replace the Toilet Float
How to Replace the Toilet Float
(Various brands) Various If you want to extend your DIY skills to home repairs, particularly in the bathroom, you can attempt to replace the toilet float when you notice wate…
How to Replace a Float on a Submersible Pump
How to Replace a Float on a Submersible Pump
(Various brands) Various Remove the submersible pump and place it on a stable surface. Using a suitable socket spanner, unscrew the nuts on the top cover and then remove the …

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos