Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair a Dented Door with Hot Glue

Model: (Various brands) Various
Part: Body

Video tutorial

Here is an incredible method to repair a dent on a door using some hot water and hot glue. Pour very hot water over the dented area to warm the bodywork.

While the area is still wet, with a support (preferably two) on which you will pour plenty of hot glue, press it onto the dented area and pull with all your strength. The dent will be lifted! At this point, you need to remove the glue with silicone thinner and polish the area with appropriate wax, and at that point, nothing will be visible, even if the dent was quite deep.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Repair Dents on Your Car's Bodywork
How to Repair Dents on Your Car's Bodywork
(Various brands) Various Have you had a small accident and your car door has a dent, but you don't want to go to the body shop? With the help of this short video tutorial, we…
How to repair a cigarette burn on upholstery
How to repair a cigarette burn on upholstery
(Various brands) Various Let’s see how to repair a cigarette burn on a car seat. Insert a piece of non-stick fabric into the burn hole to prevent the glue from adhering to th…
How to Repair a Remote Control for Free
How to Repair a Remote Control for Free
(Various brands) Various In this video, we show how to repair a remote control for free. If you have an old key that you need to keep using, but it is not worth spending more…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos