Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the piston from the Burgman 400

Model: (Various brands) Various

If you have issues with the piston mounted on your Burgman 400 and want to replace it, this guide is all you need. Just follow the instructions provided to carry out the entire procedure independently and without any difficulty. With the engine off, lift the seat and unclip the two side clips. Remove the plastic panel and disconnect the piston from the top of the seat. To disconnect the bottom, you need to unscrew the bolt with a 10mm socket. At this point, simply extract the piston completely, and you're done.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Burgman 400 Scooter
(Various brands) Various This video tutorial shows how to replace the starter motor on a Burgman 400 scooter by following some simple steps that will allow you to work indepe…
How to Remove the Boot Lid Gas Struts
How to Remove the Boot Lid Gas Struts
(Various brands) Various The breakage of the boot strut spring requires the replacement of the entire rod. Open the boot and secure it using a wooden plank to proceed with th…
How to Replace the Piston on the B48 Engine?
How to Replace the Piston on the B48 Engine?
(Various brands) Various To replace the piston on the B48 engine, remove the engine from its housing by disconnecting the connectors, pipes, and unscrewing the bolts securing…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos