Do it yourself
Frequently asked questions about cars and motorcycles

How to Tell if Your Car Battery Needs Replacing

Model: (Various brands) Various
Part: Battery

Let's look at the signs that indicate when your car battery needs replacing. We will also use a tester, an essential tool for many uses, which costs only a few pounds on major e-commerce platforms. Below 50%, the battery needs replacing or recharging (if it is rechargeable). Additionally, if the vehicle is left unused for an extended period, a chemical reaction occurs that discharges the battery. You can avoid this issue with a battery maintainer. The optimal charge is around 12.70 volts. The YouTuber performs a test called 'voltage drop', forcing the starter motor to start the vehicle. The battery voltage drops close to 10.00 volts, making it impossible to start the car. Disconnect the battery terminals and replace it. Check the voltage of the new battery with the tester; even with the voltage drop test, it should not fall below 12.70 volts.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various This video provides interesting technical insights to understand a key concept: the open circuit voltage is not enough to judge the health of a car b…
(Various brands) Various In this video tutorial, you can see when it is necessary to replace your car's engine oil. Firstly, in older vehicles without a trip computer, you ca…
(Various brands) Various A legitimate concern for those driving a dual-fuel petrol/LPG vehicle is when to change the filters, of which there are three in this type of system:…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos