Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from the Kawasaki Z750

Model: (Various brands) Various

If you need to remove the fuel tank from the motorcycle, follow these instructions: you will need a 10 mm socket spanner. First, remove the seat by unscrewing the screw at the rear. Once the seat is removed, you will have access to the tank's securing screw located at the back. Use a 12 mm socket spanner to unscrew it. Under the tank, there are two electrical connectors that need to be disconnected. Also, detach the fuel outlet pipe that feeds the engine. At this point, the tank will be free and can be removed.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing a Car Fuel Tank
Removing a Car Fuel Tank
(Various brands) Various In this video tutorial, you will see the main steps to remove a fuel tank from a generic car. First, lift the vehicle and unscrew all the bolts from …
Removing Fuel Tank from Car
Removing Fuel Tank from Car
(Various brands) Various Today, you will learn how to remove the fuel tank from a generic car. The procedure does not vary much, so we will provide only the main instructions…
How to Remove the Fuel Pump from the Tank
How to Remove the Fuel Pump from the Tank
(Various brands) Various How do you remove the fuel pump from the tank? Let's see how to take out the pump and replace it. Disconnect the battery cables, then remove the rear…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos