Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
The procedure for replacing the timing chain on a car engine is a rather complex operation, if we already have the engine disassembled the operation will certainly be simpler and we can see in this video and in this description the most important steps to follow. First it is necessary to remove all the cylinder head fixing bolts, then remove the starter motor and remove all the oil sump fixing bolts. Then remove the timing chain protective casing, slacken the chain tensioners and above all position the pins on the gears of both the camshaft and the crankshaft to prevent loss of timing. At this point it will be possible to remove the chain and replace it with the new one.
Posted on 4 April 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS on the Hyundai I20To reset the low tire pressure sensor, proceed as follows: sit in the driver's seat, turn on the ignition. On the steering wheel, among the right side controls, locate the control at the top left next to the "cruise" control. Press the control several times until the tire pressure situation is selected on the display. At this point, get out of the car and restore the correct pressure of the tire with low pressure. Then enter the passenger compartment again and the low tire pressure warning light will be off. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |