Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Injectors from a 1.3 Multijet Engine?

Model: (Various brands) Various
Part: Fuel injectors

If necessary to remove the injectors on this type of engine, proceed as follows: First, remove the covers and electrical connections of the injectors above. Next, unscrew the securing nuts of the fuel supply pipes on both the manifold side and the engine side, then remove all four pipes. After that, unscrew the bolts securing the four injectors to the cylinder head and gently lift them out. At this point, clean them if necessary or carry out their overhaul or replacement, then reassemble everything.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean Car Injectors
How to Clean Car Injectors
(Various brands) Various Here’s how to clean car injectors. Lift the bonnet and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors.…
How to replace the air filter on a 1.3 Multijet engine
How to replace the air filter on a 1.3 Multijet engine
(Various brands) Various Replacing the air filter on a 1.3 multijet engine is a rather simple and quick operation to perform independently, also thanks to our short video tut…
Removing the Timing Belt on a 1.9 MultiJet Engine
Removing the Timing Belt on a 1.9 MultiJet Engine
(Various brands) Various In today’s video tutorial, you will see how to remove the timing belt on 1.9 MultiJet engines: in this case, it’s an Opel Astra. Open the bonnet and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos