Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Tell if the Piston Rings are Worn?

Model: (Various brands) Various
Part: Engine

If you need to check whether the piston rings on your motorcycle are worn, refer to the instructions provided here and also consult the tutorial video. The test you can perform is as follows: insert the ring individually into the cylinder and position it horizontally. Check that the ring adheres perfectly to the cylinder and that the gap at the segment joint is minimal and within the tolerances specified by the manufacturer. If the tolerances are high, you will likely notice excessive oil consumption in the engine.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Know When to Change Your Tyres Without Risking a Fine
How to Know When to Change Your Tyres Without Risking a Fine
(Various brands) Various In this video, see how to determine when your tyres may be considered worn, risking a fine (as well as your safety and that of others). There is a me…
The 5 signs that it is time to replace the timing belt
The 5 signs that it is time to replace the timing belt
(Various brands) Various Today we will talk about the 5 signs that the driver must recognize to understand that the timing belt is worn out and needs to be replaced. First si…
How to Replace a CV Joint
How to Replace a CV Joint
(Various brands) Various In this video, you will see how to replace a CV joint: first, a technical drawing shows the important measurements to take for purchasing. First, rem…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos