Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Kawasaki Ninja 300

Model: (Various brands) Various
Part: Clock

If you need to change the time on the display of your scooter, refer to the instructions in this description and you can also use the video for assistance. The first step is to turn on the ignition and locate the two buttons on the left side of the dashboard below the rev counter. Press the right button, after which the time will start to flash. Press the right button again, and only the hour will begin to flash. Use the left button to change the hour value. Next, repeat the same procedure to adjust the minutes.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Kawasaki Vulcan S?
How to adjust the time on the Kawasaki Vulcan S?
(Various brands) Various In this tutorial, we can see how to adjust the time on the Kawasaki Vulcan S, an extremely simple and quick operation to be carried out, for example,…
How to adjust the clock on the Vespa Gts 300
How to adjust the clock on the Vespa Gts 300
(Various brands) Various To adjust the clock on the scooter, follow these simple steps: insert the key and turn on the ignition. At the bottom of the dashboard, you will see …
How to set the clock on the Pioneer Mosfet 50wx4 radio
How to set the clock on the Pioneer Mosfet 50wx4 radio
(Various brands) Various During the time change, it is possible that the clock on our car radio does not automatically change along with the instrument panel clock. Therefore…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos