Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Wheel Bearing

Model: (Various brands) Various
Part: Bearing

In this tutorial, you will see how to replace the front wheel bearing on a car. First, engage the handbrake and put the car in first gear, then loosen the hub nut by one turn. Next, lift the front of the car with a hydraulic jack and place safety stands underneath. Loosen the wheel nuts; once the bolts are removed, take off the wheel. After removing the wheel, take off the retaining clip for the pads, then unscrew the brake caliper bolts and detach the brake caliper and pads. Remove the caliper bracket and detach the brake disc. Remove the hub nut, then detach the lower ball joint and the drive shaft.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Wheel Bearing
Replacing the Front Wheel Bearing
(Various brands) Various Let's look at replacing the front wheel bearing of the car. Lift the car with a jack, remove the wheel to access the wheel hub. Undo the bolts of the…
If You Hear a Loud Rolling Noise, It Could Be a Bearing
If You Hear a Loud Rolling Noise, It Could Be a Bearing
(Various brands) Various If you hear a loud rolling noise inside the cabin, you might have a problem with a wheel bearing or the wheel itself. Try running your hand over the …
How to Replace the Wheel Bearing Without Removing the Hub
How to Replace the Wheel Bearing Without Removing the Hub
(Various brands) Various To change the bearing without removing the hub, apply the handbrake and put the car in first gear, then loosen the hub nut as shown in the video. Con…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos