Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plug Leads on a Car

Model: (Various brands) Various
Part: Spark plugs

In this video tutorial, you will see how to replace the spark plug leads on a car. First, order new spark plug leads from Amazon or purchase them from a car parts store; a good brand is Magneti Marelli. Once they arrive, count how many leads there are and measure carefully to avoid mistakes. Once you have the measurements, arrange them from the smallest to the largest. Now, lift the bonnet and secure it with the prop rod; remove the old spark plug leads and replace them with the new ones, following the order. Once replaced, you can start the car to test their validity. This is a simple job that doesn't take much time or require special skills; just follow the order.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Car Spark Plugs
Removing Car Spark Plugs
(Various brands) Various In the following video tutorial, you will see the main steps to remove the spark plugs from a generic car: the procedure may vary from car to car, bu…
How Spark Plug Wires are Made and How They Work
How Spark Plug Wires are Made and How They Work
(Various brands) Various In this tutorial, we will see how spark plug wires are made and how they function in cars. Typically, there are four spark plug wires, one for each s…
How to Replace Glow Plugs on a Vehicle?
How to Replace Glow Plugs on a Vehicle?
(Various brands) Various Glow plugs, as we specify, serve to preheat the air in the cylinders, allowing for combustion with diesel and thus starting the engine. If they are n…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos